How to spin SpinX
Thank you for purchasing SpinX.
The yo-yo is the core part of SpinX, which can be played as a fidget spinner, a spinning top, or a gyroscope by attaching and detaching parts.
We hope you will read the instruction manual carefully and play with it for a long time.
Because it is a metal product, it is very dangerous to drop or send it flying after it has been spinning strongly. Please be careful of your surroundings and do not make any forceful movements when making large movements.
■component
There are two types of string: one for yo-yo and one for gyro. The thinner one is for yo-yo.
■Yo-Yo
Attach the string correctly to the yoyo and your finger. Play just like a regular yo-yo.
You can also hold the hubstack and spin the yo-yo as shown in the photo below.
How to Wind the String
When winding a string, first hold the end of the string with your finger and start winding the string.
Then, wrap the string around 2-3 times and you will be able to wind it normally.
The plastic parts of the hub stack can be removed by pulling.
The bearing is fixed with an O-ring, so it can be removed by removing the O-ring.
■Spin top
Remove one hub stack and attach the shaft.
Hold the hub stack in your hand and pull the string to turn it.
If you are not familiar with the process, start with slow rotation.
Pinch the hub stack so that your fingers do not touch the yo-yo body.
■Fidget spinner
It is dangerous to try to pull with strong force suddenly. Please try to pull it gradually while practicing.
If the string is too long, it may come back and cause an unexpected injury.
Make sure that there is nothing around you that can break the cord before you start spinning it.
■Gyro Scope
Insert 4 small hexagonal bolts in 4 places to fix the horizontal ring.
■Wind up string for Gyro.
Please read carefully the instructions on how to wind the cord in Gyroscope mode.
First, pass the string through the gap between the frame and the yo-yo frame.
Next, cross the string inside the yo-yo and pull it lightly. Then, cross the string inside the yo-yo and pull it lightly.
Once the yo-yo is in this state, roll the yo-yo around with your fingers to wind the string.
The yo-yo may not be wound very neatly, but that is not a problem. Pull firmly to make the yo-yo spin.
Each part of the gyro-mode is a precision component. Dropping it from a high place will distort it and prevent it from performing as it should. When playing with it, please keep it away from the table or place a soft cushion on it.
Customer Service
About Spingear